Ambiano MD 10128 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Ambiano MD 10128에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambiano MD 10128 2 페이지. Electric wine opening set
페이지 인쇄
Quick Start Guide
B
Inserting or replacing the batteries
1. Open the battery compartment cover
of Open and remove the cover.
2. Push back the battery compartment tab
lid. (see Fig. B)
3. Insert 4 AA batteries into the battery compartment. Pay attention to the correct
battery polarity (+ or –) .
For battery replacement, remove the old batteries fi rst.
4. Press down the battery compartment lid until you hear it click into position, then
replace the battery compartment cover and close the cover by turning it to the left
in the direction of Close.
Using the electric corkscrew
1. Use the foil cutter
To do so, place the foil cutter around the neck of the bottle and then rotate it while
pressing it gently.
2. Place the electric corkscrew
remains as upright as possible at all times. If you hold the electric corkscrew at an
angle to the bottle, the cork will not be removed properly.
3. Hold the electric corkscrew fi rmly and press and hold the cork removal button
The corkscrew spiral
gradually remove the cork from the bottle.
When the corkscrew stops, the cork has been fully removed from the bottle.
4. Release the cork removal button and lift the electric corkscrew away from the bottle.
5. Press and hold the cork ejection button
The corkscrew spiral will rotate anticlockwise to eject the cork.
6. Release the cork ejection button once the cork has come off the corkscrew spiral
and then return the electric corkscrew to the storage base
7
to remove any foil from the bottle before removing the cork.
1
on the top of the wine bottle, making sure that it
12
will rotate clockwise and enter the cork, and will then
9
by turning it to the right in the direction
11
and lift up the battery compartment
2
to remove the cork from the corkscrew.
11
6
.
3
.