Asko DW953 매뉴얼 사용 방법 - 페이지 8

{카테고리_이름} Asko DW953에 대한 매뉴얼 사용 방법을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko DW953 13 페이지. Asko 1755: user guide

Re-programmings

Protected start programme

You can also prevent children starting the machine by playing with the

pushbuttons by programming the machine so that it will start only if the Start

push-button is pressed and held for three seconds.

1. Press

5 times, which gets you into the

protected start programme.

2. Press

and you get protected start (3 sec)

Press

to revert to normal operation.

Too little water in the machine?

The water level is correct when it reaches up to the marking of the lower

spray pipe bearing, see picture.

If there is insufficient water in the machine, it may be because the supply pressure

is too low. This can be compensated for by altering the admission time.

1. Press

five times within 15 seconds to get into the water level modification

programme.

2. Press

to get the normal inlet time

to get 25 % increase

to get 50 % increase

to get 100 % increase

to get 150 % increase

How to set the pumping out time

If you have a longer outlet hose or if there by other reason is a too short time for the

machine to pump out the water, the pumping-out time can be changed. Do like this:

1. Press

5 times within 15 seconds. Then you get into the changing programme.

2. Press

to get an outlet time of

Press

The indicating lamps . . .

The indicating lamps serve several purposes: besides showing the selected programme ,

they are also used if you need to trace a fault in the machine.

. . . display programme contents

T indicating lamps show what a selected programme contains.

For Normal wash, for example, the following lamps would be lit:

20 seconds

Normal time

The indicating lamps show: