Bluesound Node 2 조립 지침
{카테고리_이름} Bluesound Node 2에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bluesound Node 2 5 페이지. Pcb interface
Bluesound Node 2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (4 페이지), 빠른 설정 매뉴얼 (9 페이지), 조립 지침 (4 페이지)
페이지 인쇄
Thank you for purchasing this product. We will be very pleased if you visit our website
www.pd-cf.com
and leave your review on the product page.
PCB interface assembly instructions for
Bluesound Node 2/2i.
Remove the rear cover by pulling it at the
indicated places.
Remove top two indicated screws.
Lift the upper part of the housing by tilting it
only from the back of the device, until you
hear loud "clicks". Then lift it upwards, being
careful not to break the tapes and cables.
Put the upper case carefully next to it. Do not
disconnect cables, the sockets are secured
with adhesive.