Asko DOMESTIC TD85 설치 지침 매뉴얼 - 페이지 5
{카테고리_이름} Asko DOMESTIC TD85에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko DOMESTIC TD85 16 페이지. Heat pump tumble dryer
Asko DOMESTIC TD85에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지)
How to stack a dryer onto the washing machine (ASKO):
There is a cardboard box in the dryer drum, containing the vacuum feet and the tipping guard.
A
B
1
2
1
2
3
1
2
3
A
B
Customer Care Center, 1-800-898-1879, www.askona.com
The tipping guard consists of two metal parts (A +
1
B).
Use two screws to attach the A part to the back of the
dryer.
Undo the screw on the back side of the washing
2
machine.
Use the screw to attach the tipping guard (B part)
3
to the back of the washing machine.
Level the washing machine so that it is stable.
4
1. Level the washing machine by rotating the
adjustable feet using a No. 32 (1.26") spanner.
The feet allow levelling by +/- 1 cm (0.39").
2. After adjusting the height of the feet, fi rmly
tighten the jam nuts using a spanner No 17
(0.67"), by turning them towards the bottom of
the washing machine
3. Tighten the jam nuts.
Set the dryer feet:
5
1. Tighten the front two feet all the way in.
2. Undo the back feet by 3.5 turns or 5 mm (0.2");
then, fasten the jam nuts towards the bottom of
the appliance
Place the dryer onto the washing machine:
6
1. Lift the front part of the dryer by 5 cm (2") to
10 cm (4").
2. Attach the vacuum feet onto the front feet of the
dryer.
3. Push the dryer into the tipping guard (so that
the B part is inserted into the A part) and
release it (See fi gure on previous page).
Make sure the tipping guard is "locked"!
.
.
5