Bluesound Pulse Mini 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Bluesound Pulse Mini에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bluesound Pulse Mini 4 페이지.
Bluesound Pulse Mini에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (9 페이지)
페이지 인쇄
THIS IS A FACTORY RESET OF YOUR PLAYER. ALL CUSTOMIZATION INCLUDING WI-FI NETWORK
CONFIGURATION, FILE SHARES AND SAVED PLAYLISTS WILL BE LOST. YOU WILL HAVE TO RE-CREATE
THESE ONCE COMPLETE. THIS PROCESS IS ONLY RECOMMENDED IF YOUR PLAYER IS NOT FUNCTIONING
AND AN INTERNET FIRMWARE UPGRADE HAS FAILED. FOR ANY QUESTIONS OR CONCERNS CONTACT
AN AUTHORIZED BLUESOUND CUSTOMER REPRESENTATIVE BEFORE PROCEEDING!
Steps to Factory Reset:
1.
Disconnect the player from electrical power.
2.
Wait 10 seconds
3.
Reconnect the power
4.
The LED will flash Blue – once you see it turn Red, touch and hold the LED Mute Icon
(It will immediately turn Green and then back to Red) - do not let go of the LED.
5.
Once the LED turns back to Red, continue to hold the button for 30 seconds.
6.
After 30 seconds, the LED will begin to blink red – then release the button.
All customization to the Bluesound player will be removed and restored to factory settings.
IMPORTANT: Removing your finger from the LED at any time before the LED begins flashing red will cancel the
factory reset and leave the player in Upgrade Mode. Just start the steps again to factory reset the player.
You will know the factory reset is successful if the player returns to Hotspot mode (wireless connection - the
LED will turn solid green). If the player is connected to your network through a wired Ethernet connection, it will
simply connect as if it was a new player (LED will turn solid blue).
WARNING!