AmbiCom WP-SA 빠른 설치 매뉴얼 - 페이지 3

{카테고리_이름} AmbiCom WP-SA에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AmbiCom WP-SA 12 페이지. Wireless printer adapter

Additional Slave PC Adapter Installation

This section provides installation procedures for users with existing AmbiCom Wireless Printer

setup to add addition Slave PC Adapter. You can add up to 30 Slave PC Adapters to one Master

Printer Adapter. However, during normal operations, only ONE Slave PC Adapter will be able

to connect to the printer at a time.

Mac Users : The instructions in this section apply to both PCs and Macs as long as you install

the USB driver to your printer according to the printer manufacturer's instructions.

1. Power on the PC and printer.

2. If you have not already installed your printer's USB driver onto the PC in which you're

installing the Slave PC Adapter, please follow the printer manufacturer's instructions to do so

now.

3. Unplug previously paired Slave PC Adapters in the printer network.

4. Unplug the Master Printer Adapter from the Printer's USB port.

When the Master Printer Adapter is unplugged from the printer, it will flash once and then

remain off temporarily.

5. Disconnect the AC Power plug from the Master Printer Adapter, leaving the power adapter

connected to the power outlet.

WP-SA Quick Installation Guide v.1.0

Page 3