AmbiCom WL22-AP 빠른 설치 매뉴얼

{카테고리_이름} AmbiCom WL22-AP에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AmbiCom WL22-AP 6 페이지. Ieee 802.11b+ wireless lan 22 mbps wireless access point
AmbiCom WL22-AP에 대해서도 마찬가지입니다: 제품 사양 (1 페이지)

페이지 인쇄

Quick Installation Guide

IEEE 802.11b+ Wireless LAN

22 Mbps Wireless Access Point

Model: WL22-AP

Installing and Connecting the Access Point

Power everything down, including your PC, your Cable or DSL modem, and your

Hub/Switch/Router.

Connect the Ethernet or Network Cable from Access Point to the HUB or Switch.

Power on the Hub/Switch/Router.

Connect the power supply cable to the power port at the back of the Access Point and then

insert the AC plug into a power outlet.

• The power LED will illuminate RED

• The LINK and TX/RX will illuminate GREEN for 2 second and then will blink for a

few seconds.

5. Power on the Cable or DSL modem. Verify that the power is on by checking the LINK LED

in the WAN connection.

6. Power on your desktop PC or Laptop and activate your wireless LAN adapter (PC/PCI, USB

Adapter, etc.).

The default IP address is 192.168.1.1 with a subnet mask of 255.255.255.0. You will need to

assign your computer a Static IP within the same ranges as the Wireless Access Point's IP

address for the purpose of configuration. The Link LED will light on to indicate a proper

Ethernet connection.

NOTE: When connecting the Access Point to an Ethernet adapter in a computer, please use a

crossover Ethernet cable.

Installing the Configuration Utility

1. Insert the AmbiCom Installation CD into an available CD-ROM drive. Unless you have

deactivated the auto-run feature in Windows, an interactive installation screen should appear

automatically. If an installation screen does not appear automatically, you can access the

installation program by clicking the Start button and selecting Run. In the drop down box

provided, type "D:\setup.exe" and click OK ("D" represents the CD-ROM drive).

2. Click Install WL22 Products

3. Click Install WL22-AP Utility

WL22-AP Quick Installation Guide v.1.1

Page 1