Asko TD70 사용자 지침 - 페이지 7

{카테고리_이름} Asko TD70에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko TD70 16 페이지. Tumble dryers

S1.1

S1.2

S1.3

Program

S1.1-

Automatic programs

S1.4

In this program the drying time is controlled by the microprocessor, depending

on the moisture level measured by the moisture sensor and the dryness of the

chosen program. The temperature is controlled by the thermistor to 60°C.

By very small loads or empty machine, these programs will use a drying time of

about 20 minutes.

S1.1

Extra dry

S1.2

Normal dry 1

S1.3

Normal dry 2

S1.4

Iron dry

The programs are ended by a cooling-down sequence, which goes on till

the air temperature is ca 40°C or for a maximum time of 15 min. D2 indicates

"C" during the cooldown period.

S1.5

Timed program

One press on S1.5 means 5 min. drying time + cool down till the air temperature

is 40°C or maximum 15 minutes.

Continued pressings increases the drying time to 10, 15, 20, 30, 50, 60, 70, 80,

90, C (just cool air 15 min.), 5, 10 etc.

Drying temperature 53°C.

D1 and D2 indicates drying time in minutes. After starting the machine counts

down with 1 for each minute. Cool down sequence is indicated with "C".

Low temperature

Lowers the temperature in program S1.1-Sl.4 from 60°C to 53°C.

S2 is automatically activated in program S1.5.

Intermittent action

Means that the motor rotates for 3 seconds every minute during one hour after

end of program.

Buzzer

A buzzer tone of 3 seconds (ca 65 dBA) indicates end of program.

TD 73

S1.4

D2 D3 D4

S1.5