Ambiductor HEAT 1 작동 및 장착 지침 매뉴얼 - 페이지 5
{카테고리_이름} Ambiductor HEAT 1에 대한 작동 및 장착 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambiductor HEAT 1 20 페이지.
Operating instructions
Display management is done through the button on the front
of the calculator.
Screen Features
The meter has an 8-character LCD with symbols for various
parameters, units and operating modes.
Flow symbols
Flow, forward (correct flow direction)
Flow, backwards
(no arrow)
No flow registered
Menu structure
User menu in normal mode
Long press of the button (> 3 sec) changes menu.
Short press of the button (<3 sec) changes objects down.
Measurement 1.2, or if there are errors, info code 1.1 is dis-
played when the button is not pressed for 60 seconds.
See table below for explanation. Please note that this is a com-
plete list. Specific meters may not show all of these param-
eters.
Menu
Note that this is complete menu structure. For a specific meter,
some parts may be disabled.
ID
Parameter
1.1
Infocode with time stamp
(only shown in case of error)
1.2
Energy for heating
1.3
Energy for cooling
1.4
Totalizer energy for tarif 1
Ambiductor AB reserves the right to make changes without prior notice. Reprinting or copying this publication without permission is prosecuted.
Value
MAIN MENU (INT) - INTEGRAL PARAMETERS:
INT
BIL
INF
INT
BIL
INF
INT
BIL
INF
INT
BIL
INF
INT
BIL
INF
INT
BIL
INF
5
INT (integral)
BIL (Billing)
Main menu
Log screen menu
Long press
Description
All three values shown with 1 second interval.
Error in calculator
Error in temp sensor 2
Error in temp sensor 1
Error in flow sensor
Detailed descroption - see Infocodes / alarm
Shown only for combined heating/cooling meters.
"Snowflake" indicates that the tariff is linked to the meter
of cooling energy.
INF (Information)
Instant menu
Short press