Ambient Air NDK15-12K 사용 설명서 - 페이지 5

{카테고리_이름} Ambient Air NDK15-12K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Air NDK15-12K 9 페이지. Panel heater slim 1.5kw

CAUTION

1. Never use the unit in places where are not even or unstable.

2. Do not insert and pull out the plug with wet hand, as this may cause electrical shock, power supply capacity should

be enough.

3. The heater must only be used in the upright position. Never use when the unit is fallen over.

4. The unit should be far away from the object flammable or easy deform during uses.

5. Do not allow smashing the surface with rod or sharp hard tools, as this may cause deform and get rusty because of

damage of paint coat.

6. Unit surface temperature of the flanges is high, thus do not touch it except handle, knobs.

7. Don't heat wet clothing etc. on the surface of the control chamber, as this may cause undue move of the thermostat.

8. It is not recommended to use an extension cord.

WARNING

1. The surface temperature of the flanges is high, during use, thus closely supervise any children in the area of this

appliance.

2. Do not use on a wet place to prevent electrical shock.

3. Do not use out of the house.

4. If malfunctions happen during operation please put it to nearby appointed service center with the maintenance card.

Never disassemble it by yourself.

5. Be sure to pull out the plug from an outlet when not in use and before cleaning.

Choose the location

1. The heater is an appliance which can be portable or be mounted on a wall.

2. Do not locate the heater near any furniture, curtains or other appliances. Keep the heater at least 1 meter away

from the wall and any other objects such as furniture, drapes, or plants.

3. Do not locate the heater in corners.

4. Make sure to position the heater away from doors and windows.

Installation instruction

Warning! Before you install your heater, please make sure the heater is in Off position and is disconnected from

power supply.

A.For free-standing use

Accessories for free-standing use:

Insert pic

Wheel plates: 2pcs

Short screws: 4pcs

1) Turn the heater body upside down.

2) Fix the two wheel plates to the heater with the four screws supplied.

3) Turn the heater to its normal position and put it in an even and stable place.

4) The heater is ready to use as free-standing now.