ACR Electronics RCL-50 제품 지원 매뉴얼 - 페이지 15

{카테고리_이름} ACR Electronics RCL-50에 대한 제품 지원 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR Electronics RCL-50 20 페이지. Remote control searchlight system
ACR Electronics RCL-50에 대해서도 마찬가지입니다: 제품 지원 매뉴얼 (20 페이지), 제품 지원 매뉴얼 (19 페이지)

페이지 인쇄

1. Appendix B- Bulb Replacement Procedure

APPENDIX A- RCL-50B SPECIFICATIONS (with URC-102

Controller)

Specification

Mirror diameter

Rated voltage (Volt)

Rated current (A)

Applicable lamp

Peak beam candle power

(candela)

Beam spread (degrees)

Elevation angle (degrees)

Turning angle (degrees)

Elevation speed

Turning speed

Weight

Interconnect cable

*All specifications are nominal values

APPENDIX B- BULB REPLACEMENT PROCEDURE

A quartz-halogen bulb is provided with your RCL-50B. If the bulb should need

replacement, it can be ordered through an ACR dealer or through ACR Electronics. The

part numbers are P/N 6002 for 12V units and P/N 6010 for 24V units.

CAUTION: Failure to follow replacement instructions carefully can result in damage

to bulb and/or light. All part sales are final.

To replace the lamps:

1. Disconnect unit from power source and allow bulb to cool.

2. Remove three screws holding the front flange and glass in place.

3. To remove the old lamp bulb, grasp base of the lamp and pull straight out.

WARNING: do not touch glass parabolic reflector or bulb with fingers or tools!

4. Install the new lamp bulb using a soft clean cloth to avoid touching the bulb with your

fingers. insert the lamp bulb pins into socket and press firmly in place.

CAUTION: if the lamp bulb or reflector is accidentally touched, carefully

clean with a soft rag and alcohol (isopropanol) before continuing.

5. Replace the front flange and glass and install the three retaining screws. be sure the

neoprene gasket is securely in place.

6. Reconnect the unit to the power source.

Y1-03-0141E

12V Unit

4in (10.16cm)

12- 16 VDC

55W halogen

(base –x511)

H212V-55W

80,000

7°

Up 20°, Down 20°

360°

6° per second

15° per second

6.16lbs (2.79 kg)

12ft (3.66 m)

24V Unit