Ambient Technologies RCMT 설치 및 운영 지침 매뉴얼 - 페이지 4
{카테고리_이름} Ambient Technologies RCMT에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Technologies RCMT 7 페이지. Manual on/off remote control with timer
Ambient Technologies RCMT에 대해서도 마찬가지입니다: 설치 및 운영 지침 (2 페이지)
Transmitter
Do not use two (2) or more remote control systems in the same area with the same dip switch
settings, as they will communicate with each other. This may cause the appliances to
malfunction.
WARNING
Transmitter
General
The RCST Remote Control provides the manual and timed fireplace on/off operation.
The transmitter will operate the remote receiver from 1foot to a maximum of 30 feet. The
distance is reduced when batteries are low or when the receiver is inside a metal enclosure.
Initial Start-up
1. After initial power up or when RESET button is pressed, the transmitter is reset. The
reset button is located inside the battery door.
2. During system reset, all features of the LCD display will be visible. After one
second, the LCD displays will be initialized. A typical reset display is shown above.
Note that the temperature scale is degree F.
3. Press the ON button button to select between °C and °F display. It will exit setting
mode automatically after 10 seconds if no key is pressed. The transmitter will send
an off signal after reset.
4. After reset the transmitter is operating in manual mode. The room temperature is
shown as above.
50D0103 RCMT Rel 1 02/10/2006
Dip Switch (Default)
ON
DIP
OPERATIONS:
Page 4 of 7
Receiver
ON
DIP
Ambient Technologies
A Division Of Monessen Hearth Systems