Asko WM85 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Asko WM85에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko WM85 8 페이지.

See the "Settings" chapter for information on how to

switch between "Hot water On" and "Hot water Oﬀ ".

INSTALLING THE DRAIN HOSE

The machine is supplied with the outlet hose already

attached. The hose should be extended over a

suitable sink edge or drain pipe at a height of 24"

to 36" (610 mm to 914 mm) above the bottom of the

unit. (The lower height is preferable.) Make sure the

hose is not kinked.

Customer Care Center, 1-800-898-1879, www.askona.com

Drain hose can also be connected directly to the

washbasin drain via a siphon. In this case, the hose,

too, should be 24" to 36" (610 mm to 914 mm) above

the ﬂ oor. Internal hose diameter should be at least

0.71" (18 mm).

See ﬁ gure.

At least 0.71" (18 mm)

If the hose is extended, the internal diameter of

the coupling must not be less than ½" (12.2 mm).

Do not extend the drain hose higher than 36"

(914 mm) from the bottom of the unit.