ACR Electronics RCL-600A - SCHEMA REV A 제품 지원 매뉴얼 - 페이지 10

{카테고리_이름} ACR Electronics RCL-600A - SCHEMA REV A에 대한 제품 지원 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR Electronics RCL-600A - SCHEMA REV A 12 페이지. Remote control searchlight system with joystick remote control panel
ACR Electronics RCL-600A - SCHEMA REV A에 대해서도 마찬가지입니다: 마운팅 템플릿 (1 페이지), 제품 지원 매뉴얼 (12 페이지), 제품 지원 매뉴얼 (12 페이지)

페이지 인쇄

3.7

Bulb Replacement (see Figure 7)

A 150W xenon short arc lamp is provided with your RCL-600A. If it should need

replacement, it must be ordered through ACR Electronics, Inc., by P/N A1-14-

0093.

To replace the lamps:

Warning: Do NOT touch glass or parabolic reflectors with fingers or tools! Use

cloth gloves.

1. Disconnect unit from power source and allow cooling.

2. Remove four screws holding front flange and glass with provided 6mm hex

wrench.

3. Loosen mounting collar of lamp by turning collar counter clockwise. Unhook

wire from opposite end of lamp. Pull lamp out of mounting collar. Installation

is done in reverse order.

4. Replace front flange and glass and install the four retaining screws. Be sure

gasket is securely in place.

5. Reconnect unit to power source.

FIGURE 7

Y1-03-0139 Rev. C