Ambient Weather WeatherBridge Nano 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Ambient Weather WeatherBridge Nano에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WeatherBridge Nano 15 페이지. Weather station server for davis instruments

페이지 인쇄

this product for 1 year.

2. Packing List

The packing list is as follows:

WeatherBridge nano

Instruction Card

3. Preparing the Console or Envoy

Before inserting the Nano into the console or Envoy, set up your console or Envoy. This includes

setting the correct date and time, configuring the transmitter channels (if you have more than one

sensor array), rain bucket size, and station altitude. Make sure the weather station is receiving data

from all of the sensors. Please refer to the console or Envoy manual for details. The manuals are

available at www.davisnet.com.

4. Plug the Nano into the Console or Envoy

1. Power down the display console by removing the batteries and AC adapter. Failure to

remove power to the console or Envoy before installing or uninstalling any data logger may

cause damage to the data logger or console.

2. Open the battery compartment door.

Version 1.0

Figure 1

Description

Page 2