Ambient Weather WS-1171 사용자 설명서 - 페이지 9
{카테고리_이름} Ambient Weather WS-1171에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-1171 17 페이지. Advanced weather station
페이지 인쇄
To calibra
te indoor humidity, in the Set Mode with indoor humidity flashing, press the + key or
MIN/MAX key to increase or decrease the humidity setting (in increments of 1%) to match the
calibrated or known humidity source. To return the indoor humidity to the measured value, press and
hold the SET key for 3 seconds and the humidity will return to the uncalibrated value.
Note: The remote (outdoor) thermo-hygrometer will always display the measured humidity level
and not the calibrated humidity level. Only the console will show the calibrated value.
Note: The dew point calculation is based on the calibrated humidity level.
4.3
Alarm Mode
4.3.1 Alarm Display
Wh
ile in Normal Mode, press th
key
again to enter the Low Alar
wait 10 seconds).
Note: After entering the ALARM mode, the console will display the high and low alarm
s
ettings. If the value reads --.-- (dashes), the alarm is not active.
4.3.2 Alarm Programming
While in Alarm Mode, press the SET key t
High Alarm Limits:
•
Time alarm (hour/minute)
•
Indoor humid
ity high alarm
•
Indoor temperature high alarm
•
Outdoor humidity high alarm
•
Outdoor temperature / dew poin
•
Pressure high alarm
Low Alarm Limits:
•
In the Low Alarm Mode press the SET key to select the following alarm modes:
•
Time alarm (ho
ur/minute)
•
Indoor humidity low alarm
•
Indoor temperature low ala
•
Outdoor humidity low alarm
•
Outdoor temperature / dew point
•
Pressure low alarm
In the a
larm mode, Press the + key or MIN/MAX key to change or scroll the alarm value.
Hold the + key or MIN/MAX key for 3 seconds to change the number rapidly. Press the ALARM key
to select the alarm on or off (if alarm is enabled, the speaker icon on the LCD will be turned on
indicating the alarm function has been enabled).
Press the SET key to confirm the setting and cont
a
larm mode until it returns to the normal display mode.
Version 1.8
©Copyright 2011, Ambient LLC. All Rights Reserved.
e ALARM key to enter the High Alarm Mode. Press the ALARM
m Mode. Press the ALARM key again to return to normal mode (or
o set the alarms. The following are high and low alarms:
t high alarm
rm
low alarm
inue pressing the SET key to toggle through each
Page 9