Ambient Weather WS-1171A 사용자 설명서 - 페이지 11

{카테고리_이름} Ambient Weather WS-1171A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-1171A 20 페이지. Advanced weather station



Indoor humidity low alarm



Indoor temperature low alarm



Outdoor humidity low alarm



Outdoor temperature / dew point low alarm



Pressure low alarm

In the alarm mode, Press the

Hold the

key or MIN/MAX key for 3 seconds to change the number rapidly. Press the ALARM key

to select the alarm on or off (if alarm is enabled, the speaker icon on the LCD will be turned on

indicating the alarm function has been enabled).

Press the SET key to confirm the setting and continue pressing the SET key to toggle through each

alarm mode until it returns to the normal display mode.

Press the SNOOZE key or wait 30 seconds for the programming mode to timeout, and the alarm

mode will return to the normal mode.

4.3.3 Cancelling the Alarm

When an alarm condition has been activated, the specific alarm will sound and flash for 120 seconds.

Press any key to cancel the alarm.

When an alarm condition is activated again within 10 minutes, the alarm will not sound but will

continue to flash until the weather condition is stable. This feature is useful to avoid repeated

triggering for the same alarm value.

The alarm will reset automatically once the value has fallen below the set value, or if a new value is

entered.

4.3.4 Outdoor Alarm – Temperature vs. Dew Point

When the outdoor weather alarm has been triggered, it will flash on the LCD display and the general

outdoor alarm icon and high/low alarm icon will flash. For example, in the outdoor temperature

display mode, when dew point high alarm is triggered the DEW POINT icon will flash along with

general outdoor alarm icon and high alarm icon, indicating that the current alarm source is from dew

point.

Version 1.10

key or MIN/MAX key to change or scroll the alarm value.

Page 11