Ambient Weather WS-1175 사용자 설명서 - 페이지 2

{카테고리_이름} Ambient Weather WS-1175에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-1175 16 페이지. Advanced weather station

1. Introduction

Thank you for your purchase of the Ambient Weather WS-1175 Weather Station with time, indoor

temperature and humidity, outdoor temperature and outdoor humidity, barometer and weather

forecasting. The following user guide provides step by step instructions for installation, operation and

troubleshooting. To download the latest manual and additional troubleshooting tips, please visit:

The WS-1175 weather station consists of a display console (receiver), and a wireless thermometer

(remote transmitter).

QTY

Display Console

Frame Dimensions (LxWxH): 7.0 x 4.0 x 1.0 in

LCD Dimensions (LxW): 4.25 x 2.5"

Thermo-hygrometer transmitter (WH5) with mounting bracket

Dimensions (LxWxH): 4.5" x 1.25" x 0.5"

User Manual



Philips screwdriver (precision)



Drill for mounting bracket

Note: To avoid permanent damage, please take note of the battery polarity before inserting the

batteries.

Remove the battery door on the back of the sensor with a Philips screwdriver (there is only one screw,

in the middle of the unit). Insert two AAA batteries as shown in Error! Reference source not found.

(we recommend lithium batteries for cold weather climates, but alkaline batteries are sufficient for

most climates).

Replace the battery door and set screw. Note that the temperature and humidity will be displayed on

the LCD display. Looking at the back of the unit from top to bottom, the polarity is (+) (-) for the left

battery and (-) (+) for the right battery.

Version 1.0

http://ambientweather.wikispaces.com/ws1175

Item

Page 2