Ambient Weather WS-07 사용자 설명서 - 페이지 5

{카테고리_이름} Ambient Weather WS-07에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-07 15 페이지. Wireless indoor/outdoor 8-channel thermo-hygrometer with jumbo display

페이지 인쇄

All of the LCD segments will light up for a few seconds to verify all segments are operating properly.

3. Replace the battery door, and fold out the desk stand and place the console in the upright

position.

The console will instantly display indoor temperature and humidity as designated by the

icon. The remote temperature and humidity will update on the display within a few minutes

on the appropriate channel.

While in the search mode, the remote search icon

If you have more than once remote sensor (up to eight remotes are supported), the display

will automatically toggle between sensors until all sensors have reported in.

Do not touch any buttons until the remote sensor has reported in, or the radio search icon

is no longer on, otherwise the remote sensor search mode will be terminated. When the

remote sensor temperature and humidity has been received, the console will automatically

switch to the normal mode, and all further settings can be performed.

If the remote does not update, please reference the troubleshooting guide in Section 8.

2.3.1 Display Console Layout

Note: The following illustration shows the full segments of the LCD for description purposes

only and will not appear like this during normal operation.

Version 1.0

Figure 4

will be constantly displayed.

Page 5