Ambient Weather WS-08 사용자 설명서 - 페이지 6

{카테고리_이름} Ambient Weather WS-08에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-08 16 페이지. Ambient weather wireless indoor/outdoor 8-channel thermo-hygrometer with daily min/max display

페이지 인쇄

2.4.1 Display Console Layout

Figure 5

2.4.2 Sensor Operation Verification

Verify the indoor and outdoor humidity match closely with the console and

sensor array in the same location (about 5 to 10' apart). The sensors should be

within 10% (the accuracy is ± 5%). Allow about 30 minutes for both sensors to

stabilize. The humidity can be adjusted or calibrated later to match each other a

known source.

Verify the indoor and outdoor temperature match closely with the console and

sensor array in the same location (about 5 to 10' apart). The sensors should be

within 2°F (the accuracy is ± 1°F). Allow about 30 minutes for both sensors to

stabilize. The temperature can be adjusted or calibrated later to match each

other or a known source.

3. Remote Sensor Installation

It is recommended you mount the remote sensor on a north facing wall, in a

shaded area. Direct sunlight and radiant heat sources will result in inaccurate

temperature readings. Although the sensor is water resistant, it is best to

mount in a well protected area, such as under an eve. Use a screw or nail

(not included) to affix the remote sensor to the wall, as shown in

Figure 6.

Version 1.0

Page 6