Ambient Weather WS-40 매뉴얼 - 페이지 4

{카테고리_이름} Ambient Weather WS-40에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-40 7 페이지. Wireless indoor / outdoor thermometer

2.4 Sensor Operation Verification 
Verify the indoor and outdoor temperature match closely with the console and the remote thermometer
in the same location (about 5' apart). The sensors should be within 4°F (the accuracy is ± 2°F).
Allow about 30 minutes for both sensors to stabilize.
3. Remote Sensor Installation 
It is recommended you mount the remote sensor on a north facing wall, in a shaded area. Direct
sunlight and radiant heat sources will result in inaccurate temperature readings. Although the sensor is
water resistant, it is best to mount in a well protected area, such as an eve.
Use a screw or nail (not included) to affix the remote sensor to the wall, as shown in Figure 5.
4. Glossary of Terms 
Term
Accuracy
Version 1.0
Figure 4
Figure 5
Accuracy is defined as the ability of a measurement to match the actual
©Copyright 2015, Ambient LLC. All Rights Reserved.
Definition
Page 4