Ambient Weather RC-8473 사용자 설명서 - 페이지 7

{카테고리_이름} Ambient Weather RC-8473에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather RC-8473 10 페이지. Jumbo memory clock with extra large non-abbreviated day & month, alarm, and radio controlled time

페이지 인쇄

3.4.4 Snooze Mode

If an alarm is sounding, to enter the snooze mode, press (do not hold) the ALARM / SNOOZE button

on the top of the clock. The alarm icon

and hold the ALARM / SNOOZE button on the top of the clock for two seconds to silence the alarm

for 24 hours.

4. Alarm Clock vs. Memory Clock Mode

The clock has two display features:

The alarm clock mode (icons on) displays the alarm icon, indoor temperature, Radio Controlled Icon

and Time Zone in addition to the features displayed in the memory clock mode.

The memory clock mode (icons off) simplifies the display, and only shows the day of week, time, and

date. This makes the clock easy to read for the elderly and those suffering from memory loss. The

alarm and Radio Controlled Clock features continue to work.

To switch between the alarm clock and memory clock modes, select the Icons On/Off Switch:

- Slide to the

position to activate all icons and indoor temperature reading (alarm clock mode).

- Slide to the

OFF

position deactivate all icons and temperature reading (memory clock mode).

Alarm Clock Mode

5. Other Features

5.1

°F vs. °C

Press the °C/°F button to change the temperature units of measure.

5.2 Brightness Control

The brightness can be set to high, low, or auto (the backlight cannot be turned off).

Slide the

HI / LO / AUTO switch

Slide the

HI / LO / AUTO switch

Slide the

HI / LO / AUTO switch AUTO

Version 1.0

will flash. The alarm will sound again in 5 minutes. Press

to the

position to set the backlight to high.

to the

position to set the backlight to low.

position, and the backlight will automatically adjust based

Memory Clock Mode

Page 7