Ambient Weather WS-25 사용자 설명서 - 페이지 13
{카테고리_이름} Ambient Weather WS-25에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WS-25 19 페이지. Wireless 8-channel floating pool and spa thermometer with indoor temperature and humidity
페이지 인쇄
Press the MIN/MAX button again to view the MIN values.
Press the MIN/MAX button again to return to normal mode.
In MIN/MAX mode, to reset the Max/Min values, press and hold the MIN/MAX/- button for 3
seconds.
3.5
Channel Selection and Scroll Mode
Press the CHANNEL/+ button to switch the display between IN, Sensors 2 through 8, and scroll
mode
. In scroll mode, the indoor temperature and humidity and sensors 2-8 will be displayed in
five second intervals.
3.6 Sensor Search Mode and Resyncing the Sensors
If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To reacquire
the signal:
1. If a specific channel 2-8 is lost, press the CHANNEL/+ button to display this channel, then
Press and hold the CHANNEL/+ button for 3 seconds, and the remote search icon
be constantly displayed for up to 10 minutes. Once the signal is reacquired, the remote search
icon
will turn off, and the current values will be displayed.
2. If channel 1 is lost, press the CHANNEL/+ button to display IN temperature and humidity,
then Press and hold the CHANNEL/+ button for 3 seconds, and the remote search icon
will be constantly displayed for up to 10 minutes. Once the signal is reacquired, the remote
search icon
3. If new sensors are added, subtracted, or multiple sensor channels are lost, Press and hold the
CHANNEL/+ button for 5 seconds, and the remote search icon
displayed for up to 10 minutes. Once the signal is reacquired, the remote search icon
will turn off, and the current values will be displayed.
3.6.1 Best Practices for Wireless Communication
Note: To insure proper communication, mount the remote sensor on a vertical surface, such as a
wall. Do not lay the sensor flat.
Wireless communication is susceptible to interference, distance, walls and metal barriers. We
recommend the following best practices for trouble free wireless communication.
1. Electro-Magnetic Interference (EMI). Keep the console several feet away from computer
monitors and TVs.
2. Radio Frequency Interference (RFI). If you have other 433 MHz devices and
communication is intermittent, try turning off these other devices for troubleshooting
purposes. You may need to relocate the transmitters or receivers to avoid intermittent
communication.
3. Line of Sight Rating. This device is rated at 300 feet line of sight (no interference, barriers or
walls) but typically you will get 100 feet maximum under most real-world installations,
which include passing through barriers or walls.
4. Metal Barriers. Radio frequency will not pass through metal barriers such as aluminum
siding. If you have metal siding, align the remote and console through a window to get a clear
line of sight.
The following is a table of reception loss vs. the transmission medium. Each "wall" or obstruction
Version 1.2
©Copyright 2019, Ambient LLC. All Rights Reserved.
will turn off, and the current values will be displayed.
will
will be constantly
Page 13