Ambient Weather WR-111 ADVENTURER 사용자 설명서 - 페이지 5

{카테고리_이름} Ambient Weather WR-111 ADVENTURER에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WR-111 ADVENTURER 11 페이지. Emergency solar hand crank radio, flashlight with am/fm/noaa weather band, weather alert and cell phone/mp3/mp4/usb charger

페이지 인쇄

1. Lift the hand crank from the cradle, as shown in Figure 2.

2. Turn the hand crank either clockwise or counterclockwise at about two cranks per second for

3-5 minutes to activate the internal battery for initial use, or when the unit has not been used

for more than 60 days. The red battery charging light illuminates when charging, as shown

in Figure 1

3. For subsequent charges, turn the hand crank for one minute to produce 70 minutes of

continuous light for the LED flashlight, or 16-20 minutes of continuous radio usage (subject

to volume) or approximately 3-5 minutes of talk time on the cell phone (your results may vary

due to phone variation).

5. Operation

5.1 Flashlight Operation

Turn the light on and off with the light switch on the top of the unit (Figure 1).

NOTE: The flashlight switch does not operate in Weather Alert Mode.

5.2 Radio Operation

The ADVENTURER includes a digital LCD display (Figure 4) with backlighting, with the following

push button controls:

•

POWER. Turns on and off the radio. Transitions from clock display to radio tuner display.

•

MODE. Switches the radio band between AM, FM, weather band, and weather band alert

mode.

•

TUN+: Adjusts the radio frequency up

•

TUN-: Adjusts the radio frequency down

•

VOL+: Adjusts the radio volume up

•

VOL-: Adjusts the radio volume down

5.3 Time

When first powered up, the time will default to 12:00 AM.

1. Set 12Hr/24Hr Mode. Press and hold the MODE button for two seconds to enter the time

setting mode. 12 Hr will begin flashing. Press the TUN+ button to switch between 12 hour

and 24 hour time mode. Press the MODE button to proceed to the next step.

2. Set Hour. Press the TUN+ or TUN- to adjust the hour up or down. Hold the TUN button to

change rapidly. Press the MODE button to proceed to the next step.

3. Set Minute. Press the TUN+ or TUN- to adjust the minute up or down. Hold the TUN button

to change rapidly. Press the MODE button to exit the time setting mode.

Version 1.3

Figure 4

Page 5