Ambient Weather WR-333A 사용자 설명서 - 페이지 7

{카테고리_이름} Ambient Weather WR-333A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambient Weather WR-333A 19 페이지. Emergency solar hand crank radio, flashlight with am/fm/noaa weather band, certified weather alert and smart phone/pda charger

페이지 인쇄

NOTE: There is a charging LED on the back of the unit (Figure 4, reference 18). The LED lights RED

during charging. When fully charged, the LED turns GREEN.

6.1 Best Practices for Charging

We recommend periodically charging the radio completely through the WR-333A's mini USB power

input port (from your computer or the optional AC adaptor or DC converter). You can also leave it

connected to this power source all of the time (the WR-333A includes over current protection).

The solar collector will not completely charge your unit and is intended to extend the existing battery

charge.

6.2 DC and AC Power

Prior to using the WR-333A, we recommend you fully charge the rechargeable battery through the

mini USB Power Input Port (Figure 2). This may take up to four hours.

Lift the rubber tab on the back of the WR-333A to expose the power switch, as shown in Figure 2.

Select the Lithium Ion battery switch position:

Connect the DC power input cable (Figure 3) to the USB mini jack, and the other end to the USB

power source. The red battery charge indicator light will illuminate when charging (Figure 2).

Continue to charge the WR-333A for several hours or until the charging light turns from red to green.

The WR-333A is now ready for use.

Version 2.6

Figure 4

Page 7