Asko CC4727S / 4000 사용 설명서 지침 - 페이지 9

{카테고리_이름} Asko CC4727S / 4000에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko CC4727S / 4000 16 페이지.

INSTALLATION

General

This appliance should be connected to the power supply by a

recognized fitter who is familiar with, and works according to the

correct safety regulations. This appliance meets the European

requirements.

Important that you know:

• The minimum distance between the supporting surface for the

cooking vessels on the gashob and the lowest part of the range

hood must be not less than 65 cm. For use with an electric, ceramic

or induction hob, this distance must be at least 55 cm.

• If the built in unit is to be fitted to an existing duct no other

appliances, such as a geyser or heater, may be connected to that

same duct.

• Consider local regulations with respect to the ventilation of gas

appliances.

• The shorter the duct, and the fewer the bends in it, the better the

built in unit will work.

• Before you start drilling check that there are no installation cables

present.

• The connecting pipe for the built in unit has a diameter of 120 or

150 mm. It is best also to use a flue pipe of the same diameter.

• The installation material supplied with this range hood is designed

for fixing to reinforced concrete or masonry walls. For some types

of walls you may need special plugs and screws.

EN 9