Asko CW41230G 사용 설명서 지침 - 페이지 8

{카테고리_이름} Asko CW41230G에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko CW41230G 16 페이지.
Asko CW41230G에 대해서도 마찬가지입니다: 사용 설명서 지침 (16 페이지)

USE

Cleaning filters

EN 8

Active mode

• The proximity sensor detects a user standing in front of the hood

and will illuminate the icons. After 3 seconds the lighting will

automatically switch on.

Disable the active mode

•

Simultaneously press the '+' and 'timer' key for 3 seconds.

The active mode is disabled. The display show an static 'U'.

Enable the active

•

Simultaneously press the '+' and timer key for 3 seconds.

The active mode is enabled. The display show 3 times a

blinking 'U'.

Saturation grease and carbon filters

The filters should be replaced or cleaned when the grease filter

indicator or the carbon filter indicator are lit. See chapter 'Maintenance'.

Grease filter

The filter indicator will light up after 30 operating hours.

• The grease filters should then be cleaned.

•

Reset the memory by pressing and holding the '-' key until the filter

indicator stops flashing.

Carbon filter

The filter indicator will flash after 120 operating hours.

• The carbon filter should then be cleaned or replaced.

•

Reset the memory by simultaneously pressing and holding the '-'

and '+' keys until the filter indicator stops flashing.