Ambir TravelScan Pro 600 빠른 시작 매뉴얼

{카테고리_이름} Ambir TravelScan Pro 600에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambir TravelScan Pro 600 1 페이지. Ambir travelscan ps600: quick start
Ambir TravelScan Pro 600에 대해서도 마찬가지입니다: 사양 (1 페이지)

페이지 인쇄

YOU MUST INSTALL THE SOFTWARE BEFORE YOU PLUG THE SCANNER IN!

If you have already connected the scanner to your computer, cancel the operation and

You must calibrate your scanner in order for it to work properly

Skipping the calibration process will result in scans that are all black, faded or covered with black streaks.

Step 1: Scanner Installation

1. Make sure the scanner is

2. Insert the TSPRO600 Driver Installation Software CD that came with your TSPRO600 Scanner into your CD-ROM drive.

3. The CD will auto-run and start the Installation Menu. If you are using Windows Vista only install the Windows Vista driver. This will

only install the driver, not the Scan2PDF software. Scan2PDF is currently not Vista compliant and Ambir suggests that Vista compliant

scanning software be used. For more information on Vista complaint software please go to www.ambir.com/vista (Fig. 1).

Fig. 1

4. Follow the onscreen instructions by selecting the "Next" button and accepting the "License Agreement" (Fig. 4).

Fig. 4

5. Please continue the driver installation by selecting the "Continue Anyways" (Fig. 7) button then continue the installation.

Fig. 7

6. After you finish the driver installation, print the instructions and connect your TSPRO600 scanner to your computer.

TravelScan® PRO 600

Attention!

Please Read this Before Installing Your Scanner

unplug the scanner from your computer.

Quick Start Guide

NOT

connected to the computer.

Fig. 5

Fig. 2

Fig. 6

Fig. 8

PS600 —Travel Scan Pro —Quick Start Guide V2.0

Fig. 3