Ambirad Apollo QH 15-1 사용 설명서 - 페이지 17

{카테고리_이름} Ambirad Apollo QH 15-1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambirad Apollo QH 15-1 20 페이지. Quartz glow instant infra-red heaters

11. The lamp should now be removed from the

heater as shown below.

12. Refit the new lamp in reverse order

ensuring that no wires get trapped and all

screws are fully tightened.

4.4 Titan range:

1. Disconnect from the power supply and

remove the heater from wall fixings before

attempting to replace any lamp.

2. Remove the guard by flexing one end.

Remove

the

extrusion(s) and fascia panels (fitted between

lamps on large models) adjacent to the failed

lamp (see below).

4. Remove the panels to expose the lamp

connections (see below).

screws

from

the

5. Disconnect lamp leads from terminal plates,

and remove lamp retaining clips (see diagram

below).

6. Slide the lamp out through the extrusion.

7. Fit a new lamp, taking care not to mark the

reflector or handle the lamp (see caution note).

8. Replace lamp retaining clips and connect the

new lamp leads to the terminal plates, ensuring

end

live/neutral leads are also reconnected.

9. Replace the end extrusion(s) and fascia

panels securely, using the fixings previously

removed and refit the guard.

Caution. Do not handle lamp with bare hands.

Remove finger marks with a soft cloth and

methylated spirit or alcohol. Finger marks will

burn into quartz causing premature lamp failure.

Please note: Apollo outer casing can reach

high temperatures.