Ambirad Apollo QH 45-3 사용 설명서 - 페이지 13

{카테고리_이름} Ambirad Apollo QH 45-3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambirad Apollo QH 45-3 20 페이지. Quartz glow instant infra-red heaters

Typical multiple heater assembly

2.4

Titan range:

2.4.1 Titan Static heater

The support stand for the Titan Static heater is

supplied in two halves for ease of packing.

1. Place the base half stand 'A' on the work

surface.

2. Remove both self tapping screws 'D' from

the inside of each leg.

3. Slide the top half of the stand 'B' into

position to fit inside of the base half stand.

4. Replace the self tapping screw 'D' and fully

tighten.

5. Remove the 2 bolts and washers 'C' from

the back of the heater.

6. Place the heater against the top half of the

stand and replace the 2 screws and washers

'C' ensuring they pass through the fixing

bracket and fully tighten.

2.4.2 Titan Mobile heater

The support stand for the Titan Static heater is

supplied in two halves for ease of packing.

1. Interlock the two base plates with the base

anchor plate uppermost.

2. Affix the casters to each of the four ends.

3. Join the support to the anchor plate and bolt

trough the base pieces.

4. Affix the head anchor bracket to the top of

the support.

5. Attach the heater head to the top of the

support.