Ambirad Apollo QHL 45-3 사용 설명서 - 페이지 10

{카테고리_이름} Ambirad Apollo QHL 45-3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambirad Apollo QHL 45-3 20 페이지. Quartz glow instant infra-red heaters

2. Use a minimum of 1.0mm2 H05RN-F supply

cable with 2 poles and earth and sleeve with

silicon glass fibre braided (250°C) sleeving.

The live and neutral wires must be

connected to the terminal block. See below.

3. The green/yellow wire should be connected

to the clamp marked with the earth symbol

using a suitable wire terminal. Fit cord grip

and terminal box saddle once wired.

4. Tighten the barrel nut of the compression

gland so that the

cable.

5. To prevent water

ingress, ensure that

the cover is secured

well

hand

tightening

all

screws evenly.

1.4.4 Titan range:

• Warning – this appliance must be earthed.

• The Titan series heaters are fitted with 3.0

metres of supply cable and a moulded 13A

plug therefore it is unnecessary to remove

the terminal cover plate in order to carry out

normal installation of this model.

rubber seal grips the

for