Askoll PURE XL HC LED Instruction Manual - Page 6
Browse online or download pdf Instruction Manual for Aquariums Askoll PURE XL HC LED. Askoll PURE XL HC LED 14 pages. Marine aquarium kit
Also for Askoll PURE XL HC LED: Instruction Manual (14 pages)
Print Page
3.3. Technical data
Description
Capacity
Product weight
Maximum allowed weight
of the aquarium
Height
Width
Depth
Water temperature
(min. / max.)
PUMP / LIGHTING UNIT / THERMAL HEATER
Power supply
Consumption
IP protection rating
4. PREPARING THE PRODUCT FOR USE
4.1. Unpacking
WARNING
The product has glass components.
Handle with care and place it according to the instruc-
tions of this manual avoiding to lean the tank directly
on the edges.
1) Open the carton's top flaps and remove the polystyrene sheet.
2) Extract the product as indicated on the packaging itself. Always
handle it with care.
3) Place it on a flat, smooth and clean surface; take care not to
scratch or damage the glass tank bottom.
4) Remove the transparent film on the covers and upper frame.
5) Remove the lighting and filter covers from the frame (fig. 3) and
place them on a flat, clean surface without scratching them.
6) Remove the pump unit (fig. 4) and place it on a flat surface.
3
PURE XL HC LED
MARINE
L
130
Imp gal
28,6
kg
28,3
kg
215
cm
57
cm
76
cm
36
°C
from +5 to +35
V / Hz
See data provided on the
W
individual electric devices
making up the product.
4
EN
7) Remove the frame from the tank (fig. 5) and place it on a flat,
clean surface without scratching it.
8) Carefully remove the thermal heater and led driver from their
packaging inside the tank, along with the cable guide.
9) Dispose of the packaging material in observance of local reg-
ulations.
10) Check that the product has all the components indicated in par.
3.2.
4.2. Positioning
The product must be positioned with care, in observance of the fol-
lowing instructions:
WARNING
To avoid instability risk: check with a level that the sup-
port surface of the product is horizontal.
Do not lean the product on inclined surfaces.
CAUTION
It is advisable to place the product on the foreseen
aquarium stand. Alternatively, use a sturdy support
able to bear the maximum allowed weight of the
aquarium (see technical data par. 3.3). Such support
must have a levelled, smooth and clean support sur-
face.
In order not to ease algae proliferation: place the
product far from heat sources and direct exposure to
sunlight.
1) Place the product with the writing "PURE MARINE" (or "FRONT")
on the front side and at such a distance from the power outlet
to allow the creation of a drip loop for each power cable of the
electric devices.
2) Remove the label "PURE MARINE" (or "FRONT") and dispose
of it in accordance with the regulations in force in the country
where disposal takes place.
5
7