101VOICE IP1060G Quick User Manual - Page 2
Browse online or download pdf Quick User Manual for IP Phone 101VOICE IP1060G. 101VOICE IP1060G 3 pages. Programming function keys
Also for 101VOICE IP1060G: Quick User Manual (2 pages), Quick User Manual (3 pages)
Print PageKey
Function
OK
Telephone Lines
Key Pad
Color LCD Screen
Making Calls
1.
Enter the phone number on telephone dialpad.
2.
Either pickup the handset, press the
Headset
Speaker
button, or press the
Dial
softkey on the bottom of the LCD display.
3.
To end the call, either hang up the handset, press
Tips:
No need to dial
9
to make external system calls (outside line).
No need to dial the Area Code if the destination number has the same Area
Code as your phone's caller ID.
No need to dial
1
before any phone numbers.
No need to place an existing call on hold to take another call. You can simply
switch calls by pressing the phone line Function Keys.
Accepting Calls
1.
Either pick up the handset, press the
Headset
press the
Speaker
button, or press the
Call Park/Orbit (System-Wide Hold)
(This function allows users to place an incoming call on system-wide hold, so the call can be
retrieved from any phone within the location).
1.
With the caller on the line, press the
Call Park
2.
Wait for about (2) seconds to hear the "Call Park extension number" (i.e. 701 or 702).
3.
Then press the
End
soft key or hang up the handset (you must do this for the call to
be in Park mode).
4.
The Parked call can be retrieved via any phone by dialing the "Call Park extension
number" within (2.5) minutes.
Tips:
You should announce "You've got a call on 701" or "There's a call waiting for
you on 702", etc
IP1060G IP Phone User Guide - Powered by 101VOICE
button (if a headset's connected), press the
End
soft key, or press the
Speaker
button (if a headset's connected),
Answer
soft key on the LCD display.
Function Key.
Pick up
1.
If a phone is ringing, users of other phones in the same pickup group may press pick up
function key to intercept the call and bring it to their phone.
Conference Calls — 3-Party Audio Conferencing
1.
While the 1st party is on the phone, press the
or
Conference
2.
Dial the 2nd party phone number (internal or external phone number), then press the
soft key.
3.
Press the
Conf
select the caller on-hold and press OK.
4.
You may press the
Transferring Calls — Announced/Attended Transfer
button.
1.
While the 1st party is on the phone, press the
number to transfer (internal or external), then press the
2.
Announce/notify the receiving party about the transfer.
3.
Press the
XFER
the 1st party.
Transferring Calls — Unannounced/Blind Transfer
1.
While the 1st party is on the phone, press the
number to transfer to (internal or external), then press
Transferring Calls — Direct Voicemail Transfer
(This function allows users to transfer directly to an extension's voicemail without ringing the
phone).
1.
Press the
Transfer
number,then press
Ring Type/Volume Selection
1.
Press the
OK
navigation key, or the
2.
Select Basic, then Ring. Then select
Pair Bluetooth Headset
1.
Press the
Menu
Select Basic, then Bluetooth.
2.
3.
Use right and left keys to enable . Select paired device or if no paired is displayed
press
Scan
to search, long press your bluetooth pairing button until you hear pairing,
then select the scanned device to connect.
Conf
soft key at the bottom of the LCD display
button.
soft key again - to join the conference, use Navigation Keys (up or down) to
End
soft key to end the conference, or
Transfer
button or
Dial
soft key to complete the transfer, or press End, then
Transfer
button or
XFER
button or
XFER
soft key, dial
*8
followed by the destination mailbox
XFER
again.
Menu
soft key, to access the phone's menu.
Ring Type
or
Ring
Volume.
soft key to access the phone's menu.
Copyright © 101VOICE. All rights reserved.
Dial
Split
to split the callers.
XFER
soft key, dial the
soft key.
Resume
to return to
XFER
soft key, dial the
again to complete the transfer.