ACR Electronics The Buxton BX1MF Technical Manual - Page 10

Browse online or download pdf Technical Manual for Stove ACR Electronics The Buxton BX1MF. ACR Electronics The Buxton BX1MF 20 pages.

Print Page

Please note that during the first firing, we recommend a small fire is lit and

that you slowly increase the temperature to enable the various parts to

You may also experience fumes and a haze being given off by the stove

during the first firing and possibly for the next couple of firings as the paint

cures. This is normal but please ensure that the room is well ventilated

The appliance should not be operated in mild weather with smokeless

fuel. Under certain weather circumstances e.g. fog the chimney will not

draw sufficiently well and could cause asphyxiation. Either await better

In the rare event of a malfunction due to overheating or a chimney fire,

the air slides should be shut down completely and the fuel allowed to

burn out. In the event of a chimney fire, once the air slides have been

closed completely, dial 999 for assistance. If the appliance has

overheated, the appliance will need to be inspected for any damage

Recommended Fuels

Wood – hardwood such as ash, oak and beech which have been cut for

at least 2 years and stored under shelter.

maximum moisture content of 20% and a maximum log length of 400mm.

Smokeless Fuels – such as Anthracite, Phurnacite & Ancit

Prohibited Fuels

Green wood – i.e wood which is less than 2 years old with a moisture

content of above 20%

Recovered wood – i.e pallets, railway sleepers etc. These will have been

chemically treated and will pollute the atmosphere and possibly overheat

the appliance.

Housecoal or Bituminous coal – these fuels will soot up the airways of the

stove and possibly overheat the appliance.

Petroleum Based Coke – this will overheat the appliance and possibly

damage the unit. (Not above 20% Pet coke content)

Any form of liquid fuels.

User Instructions

expand normally.

during this period.

weather or burn wood only.

before it can be operated again.

The logs should have a