AMC iLive series User Manual - Page 4
Browse online or download pdf User Manual for Microphone system AMC iLive series. AMC iLive series 16 pages. Uhf wireless system
Print Page8-step level display showing incoming RF signal
8-step level display with "PEAK" warning showing incoming AF signal
When the FREQ light glows, displayed numbers show active frequency.
When the CHAN light glows, displayed numbers show active channel.
Squelch (MUTE) indicator: with the active mute, no signal is transmitted to outputs
Diversity display (shows if antenna I or antenna II is active).
Operating Menu
Before turning on the receiver, firstly ensure that the transmitter is switched off, and then
•
adjust receiver volume to the min.
Check for Audio and Radio frequency decibel meters. If values are high exchange the
•
channel to avoid the noise spot, it may also increase the static chirp value, enhancement
anti jamming ability.
Lastly turn on the transmitter power source, the corresponding channels radio frequency
•
decibel meter lightens. Adjust receivers audio output level to suitable size, then speak to
the microphone, the receiver audio frequency decibel meter lightens in correspondence
to microphone volume level. If voice output is not hearable and the decibel meter is not
bright, overhaul transmitter and receiver.