ACR Heat HERITAGE N25 Installation And Operating Instruction Manual - Page 5

Browse online or download pdf Installation And Operating Instruction Manual for Indoor Fireplace ACR Heat HERITAGE N25. ACR Heat HERITAGE N25 10 pages.

Print Page

Figure 1

ASSEMBLY

The following tools are required:

10mm, 13mm and 17mm wrench or socket wrench

Cartridge gun for the fire cement

Electric drill for self threading screws

1. Start off by getting an overview of all the loose parts and check that

you have the following:

a. Smoke dome

b. 2 x bolts with washer to fix the smoke dome

c. Insert with radiation shield

d. 3 x M10 bolts with counter nut for floor adjustment

e. Wooden handle

f. Fire cement

g. Heat resistant glove

h. Warranty card

i. 2 x right angle brackets & 6 bolts to suit

j. flue adaptor

k. Canopy and brackets (if appliance to be installed freestanding)

l. Base cover

2. Turn the appliance onto it's back and fix the floor adjustment bolts in

the approximate height needed for your installation.

3. Installation of the smoke dome

Place the pre-roped smoke dome on the top of the stove.

Secure in

position using the nuts and bolts provided as illustrated in figure 4. The

smoke dome can be rotated no more than 50mm to the left or to the right

to coincide with the flue connection. Fix the flue adaptor to the smoke

dome exit and seal with fire cement.