Flo Fab 1.25FFGP204 Installation, Operation & Maintenance Manual - Page 3
Browse online or download pdf Installation, Operation & Maintenance Manual for Water Pump Flo Fab 1.25FFGP204. Flo Fab 1.25FFGP204 13 pages.
Print Page
DISCHARGE:
LIQUID TEMPERATURE:
VOLUTE:
MOTOR HOUSING:
SEAL PLATE:
IMPELLER:
SHAFT:
O-RINGS:
PAINT:
SEAL:
HARDWARE:
CORD ENTRY:
BEARINGS:
MOTOR:
MOISTURE SENSOR:
OPTIONAL EQUIPMENT:
MODEL
HP VOLTS PHASE
1.25FFGP202
1.25FFGP203
1.25FFGP204
1.25FFGPC202 2
1.25
202A
FFGPC
*
* Includes the level control with the pump.
27.7"
1¼" NPT, vertical.
Continuous: 120° F (48° C) max.
Intermittent: 140° F (60° C) max.
Cast iron ASTM A-48 class 30.
Cast iron ASTM A-48 class 30.
Cast iron ASTM A-48 class 30.
12 vanes, vortex, with vanes on back side, dynamically balanced. Cast iron ASTM A-
48 class 30.
Radial cutter: hardened 440C, stainless steel, hardness Rockwell C-55.
Shredding ring: hardened 440C, stainless steel, hardness Rockwell C-55.
420 series stainless steel.
Buna-N.
Air dry enamel, water based.
Double mechanical, oil lubricated. Ceramic stationary part, carbon ring seal and
exclusion in the rotating part. Buna-N elastomer and stainless steel spring.
Stainless steel.
30 ft of neoprene cord, sealed against moisture.
Ball, single row, oil lubricated.
Single phase: permanent split capacitor, oil lled, with overload protection in
motor. Class F insulation. Model BGP202DS requires capacitors and relay to be
installed in control panel. Model BGPC202DS o ers internal capacitor design.
Three phase: oil lled, with overload protection in motor. Class F insulation.
Normally open (N/O) included.
Additional cord, slide rail coupling (SRC-1¼").
RPM
(nominal)
AMPS
2
230
1
3450
2
230
3
3450
2
460
3
3450
230
1
3450
2
230
1
3450
MAX
CORD
CORD
LOCKED
ROTOR AMPS
SIZE
TYPE
14.5
23
12/3 SOOW
8.8
22.5
12/4 SOOW
4.4
11.3
12/4 SOOW
14.5
23
12/3 SOOW
14.5
23
12/3 SOOW
8.15"
Speci cations & Dimensions
INTERNAL
MOISTURE
WEIGHT
CAPACITOR
SENSOR
(pounds)
No
Yes
130
n/a
Yes
130
n/a
Yes
130
Yes
No
130
Yes
No
130
5.6"
10"
02