Amcor PLM 9000E Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Air Conditioner Amcor PLM 9000E. Amcor PLM 9000E 13 pages. Plm mono blocs

Print Page

Setting the temperature

If you want to change the set temperature press

display will indicate the set temperature.

Note: Reaching the set temperature depends on the room and outdoor climatic conditions.

Mode switch

Press the

button successively until the icon representing the desired mode is appearing

(=> Cool => Fan => Heat => etc). On the LCD-display you will see:

Cooling

Each time the unit starts, it starts operating in cool mode with a set temperature of 22°C. The

fan speed will be selected automatically. Heat mode is only available on EH models.

Fan speed

If you prefer a constant fan speed instead of the auto fan speed, press the

successively; the fan icon

• Fast - for the turbo speed

• Normal - for the medium speed

• Slow - for the slow speed

• Alternating - for the auto fan speed (in the cooling mode only!)

Heat

EH models feature a 1650 W electric heater that can heat a room on cooler days. With

the mode switch select

temperature is reached. Fan speed is selected automatically. Do not place the unit near

anything that could catch fire or be scorched. Do not obstruct the air outlet. The heat

function will operate with or without the hose attached.

Timer

For all of the following TIMER programming, proceed firstly with these standard steps:

• Press the

button briefly; the 2 left digits of the 4 digits on the LCD display are flashing.

• Press

to adjust the hour.

• Press the

button briefly again, the 2 right digits of the 4 digits are flashing.

• Press

to adjust the minutes of the clock in intervals of 5 minutes. The timer is set.

After 10 seconds the time display returns.

Programming the timer for ON - when the unit is OFF.

• Perform the standard steps as described above.

The circular time scale will be on between the ON programmed times

until 24:00. The flashing bar on the time scale indicates the real time and

moves a segment ahead every 30 minutes until it reaches the ON timer

time, then the black segments in the circular time scale will disappear.

Programming the timer for OFF - when the unit is RUNNING.

• Perform the standard steps as described above.

The circular time scale will be on between the present time to the OFF programmed time.

The flashing bar on the time scale indicates the real time and moves a segment ahead every

30 minutes until it reaches the OFF timer time, then the black segments in the circular time

scale will disappear.

6 6

Fan only

on the LCD-display will rotate accordingly.

, set the desired temperature and the unit will heat until this

to set the temperature. The 2 digit

Heat

button

Timer example