Flodin Works Flodin Modelwork Saab 29 Tunnan Manual - Page 4

Browse online or download pdf Manual for Toy Flodin Works Flodin Modelwork Saab 29 Tunnan. Flodin Works Flodin Modelwork Saab 29 Tunnan 11 pages.

Print Page

PRINTER SETTINGS

Printer setting
Material
Quality
Layer height
Line width
Walls
Perimeters
Vase/spiral-mode
Top/bottom
Top layers
Bottom layers
Infill
Infill density
Infill pattern
Supports
Retract distance
COLORFABB'S LW-PLA
The use of LW-PLA has really been a game-changer for 3d-printed
airplanes. Half the weight and nicer surface finish.
The only con is that it's oozing a lot.
To overcome this you can design the parts for printing with as few re-
tractions as possible. That is what I've tried to do with this J29 Tunnan.
Speed
With LW-PLA you have to drop the speed quite drastically. Colorfabb
recommends 40-100mm/s but I found that 25mm/s makes much more
clean and accurate parts.
Temperature and Extrusion multiplier
In my settings I use 250° and 0.45 for Extrusion multiplier. To get it
right for your machine I strongly recommend that you do a test cube
and try different temperatures and multiplier settings till you get a wall
thickness of 0.4mm.
Retraction
I dropped the retraction to 0.5mm. If you have the same settings as
ordinary PLA the nozzle will clog eventually.
Slicer
I strongly recommend you to use Prusa slicer. Get it here for free. All
thin wall parts is designed for Prusa slicer in mind.
J2 9 TUNNAN - MANUAL
A
B
LW-PLA
LW-PLA
0,2mm
0,2mm
0,4mm
0,4mm
1
1
Yes
No
0
0
7
7
0
0
—
—
No
No
0,5mm
0,5mm
FL O DI N M ODEL W O RKS
C
D
LW-PLA
Clear PLA or PETG
0,2mm
0,2mm
0,4mm
0,4mm
1
1
No
Yes
2
0
7
1
6%
0
Gyroid
—
No
No
0,5mm
No change
E
PLA
0,2mm
0,4mm
2
No
3
3
15%
Gyroid
No
No change
4