Flodin Works Flodin Modelwork Saab 29 Tunnan Manual - Page 9

Browse online or download pdf Manual for Toy Flodin Works Flodin Modelwork Saab 29 Tunnan. Flodin Works Flodin Modelwork Saab 29 Tunnan 11 pages.

Print Page
h-stab-tip-right.3mf
h-stab-right.3mf
Part
Material
h-stab-left
LW-PLA
h-stab-right
LW-PLA
h-stab-tip-left
LW-PLA
h-stab-tip-right
LW-PLA
elevator-left
LW-PLA
elevator-right
LW-PLA
elevator-tip-left
LW-PLA
elevator-tip-right
LW-PLA
4 VERTICAL STAB
Part
Material
v-stab
LW-PLA
v-stab-top
LW-PLA
Clean the the parts.
Glue the parts together and glue the vertical stab to the fuselage with
the 3mm carbon rod.
And done.
J 29 T U NNA N - M A NUA L
elevator-tip-right.3mf
3 HORIZONTAL STAB
h-stab-left.3mf
Printer setting
A
A
C
C
A
A
C
C
Printer setting
A
C
elevator-right.3mf
As always... Clean the the parts. As with the wing you'll ned to cutaway
a small piece where the parts overlap before glueing. Dry fit the parts
and trim til you have a snug fit before you glue.
Glue the elevator together. Use the carbon rod as a guide tool.
Next, glue the horisontal stab pieces together and glue them to the
fuselage with the 3mm carbon rod.
The elevator is hinged with a carbon rod so the installing is super
simple. First attach a pushrod (1,2mm pianowire) and slide it through
the fuselage through the guide holes. Then place the elevator in place
and slide the carbon rod in place.
And that's all.
F L O DI N M O DE L WO R K S
elevator-left.3mf
elevator-tip-left.3mf
h-stab-tip-right.3mf
9