Amcor AM-90 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Air Cleaner Amcor AM-90. Amcor AM-90 12 pages. Air purifier and ioniser
Also for Amcor AM-90: Owner's Manual (6 pages)

Print Page

CONTROL PANEL AND OPERATION

Connecting to the mains power supply and using the

a. When the unit is plugged into the mains power supply or when one of the

buttons is pressed, the unit will make a beep sound.

b. If the AM90 is off (the LCD screen is blank) and the

it will go into the stand-by mode where only the time will be displayed. The blue

LCD backlight will turn on when one of the control buttons is pressed.

c. If the unit is operating or in stand-by mode and the

the unit will go off.

Setting the time:

a. The first time the AM90 is switched on (after connecting to the mains and

pressing the

POWER

b. Press the

button (4) for a few seconds and the hour digits will flash.

TIMER

c. Hold down the

IONISER

button (3) and the hours will count down in single steps. Stop when you

IONISER

have the correct hour setting. In a few seconds the minutes digits will flash.

d. Hold down the

IONISER

the

button (3) and the minutes will count in single steps. Stop when

IONISER

you have the correct minutes setting. In a few seconds the time digits will stop

flashing and time will be set.

e. The

button (2) works like the

SPEED

f. As long as the unit is connected to the mains, the unit will keep track of the time

(even in the off mode, when the LCD screen is blank).

g. Note: The time can only be set, when the unit is in the stand-by mode.

Turning the unit on:

a. If the unit is in the stand-by mode and the

will start operating at the high fan speed.

b. Pressing the

SPEED

high fan speed – medium fan speed – low fan speed – stand-by mode.

c. The fan speed is shown on the LCD screen with bar graphs on each side and by

the fan symbol

button), the time will be displayed with all zeros.

button (3) and the hour digits will scroll down. Press the

button (3) and the minutes digits will scroll down. Press

IONISER

button (2) repeatedly will cycle through this sequence:

turning at different rates.

button (1):

POWER

button (1) is pressed,

POWER

button (1) is pressed,

POWER

button (3), but the digits count up.

button (2) is pressed, the unit

SPEED