Floe P1200 Assembly Instructions Manual - Page 12
Browse online or download pdf Assembly Instructions Manual for Lifting Systems Floe P1200. Floe P1200 12 pages. Anchoring system
Print PageIF ADDITIONAL ADJUSTMENT IS REQUIRED, LOOSEN 3/8" NUTS AND SLIDE POCKETS
ON FRAME BEAM WITH ANCHOR ASSEMBLIES UNTIL DESIRED POSITION IS FOUND.
ONCE POSITION IS SET, RE-TORQUE NUTS TO 35 FT-LBS (FIGURE 2.9).
DRIVE ANCHOR ASSEMBLY INTO LAKE BOTTOM USING 1-1/8" 6 POINT SOCKET & 1/2" DRIVE
RATCHET UNTIL COLLAR TOUCHES TOP OF ANCHOR POCKET (FIGURE 2.10).
IMPORTANT NOTE:
ONLY USE A 6
POINT SOCKET.
12 POINT SOCKETS
MAY CAUSE
DAMAGE TO HEX
SHAFT.
6 POINT SOCKET
12 POINT SOCKET
DO NOT USE
2X
FIGURE 2.10
SHEET 12 OF 12
IMPORTANT
IMPACT OR
CORDLESS
ANCHORS.
2X
FIGURE 2.9
DO NOT
USE AN
DRILL TO
INSTALL
LIFT