Flomec QS100-10 Product Owners Manual - Page 5

Browse online or download pdf Product Owners Manual for Measuring Instruments Flomec QS100-10. Flomec QS100-10 16 pages. In-line irrigation ultrasonic flowmeter

Print Page

GENERAL SAFETY INSTRUCTIONS

IMPORTANT:

Ensure that all equipment operators have access to adequate instructions

concerning safe operating and maintenance

CAUTION

It is your responsibility

This product is not approved for use with

petroleum products (diesel fuel, unleaded

gasoline, jet fuel, kerosene, etc.), aromatic

hydrocarbons or other incompatible chemicals.

This product is not approved for use in

hazardous locations.

When applying power, adhere to specifications

listed in appropriate electronics manual.

Disconnect external power before attaching or

detaching input or output wires.

Compatibility of this product's material and the

process fluid and/or environment should be

considered prior to putting into service.

Product should never be operated outside its

published specifications for temperature or

pressure. See specifications for your model.

Make sure flow and pressure have been

eliminated from process pipe prior to installing

or removing product.

Installation near high electromagnetic fields

and high current fields is not recommended

and may result in inaccurate readings.

Do not allow water to freeze in meter. Ice

expansion may burst the plastic housing.

Do not allow this meter to be used with steam.

Take precautions to remove sand and debris

from flow stream. Prolonged exposure to meter

will affect meter performance and cause

irreversible damage.

Entrapped air pockets and air bubbles will

adversely affect meter performance.

to:

procedures.