Flomec TM40S Product Owners Manual - Page 8
Browse online or download pdf Product Owners Manual for Measuring Instruments Flomec TM40S. Flomec TM40S 13 pages. Electronic water flowmeters 3 inch & 4 inch meter sizes
Print Page
INSTALLATION ( CONTINUED )
Connections (continued)
8
1.800.561.8187
5. For ANSI or DIN Flange Fittings - Customer to provide:
• Ring Gaskets or Full-Face Gaskets approved for use with type flange
installed (ANSI or DIN) and the fluid being monitored (2 required).
• 5/8-inch bolts and nuts for ANSI flanges. Four per side for 3-inch
• 16 mm bolts and nuts for DIN flanges. Eight per side for 3-inch and
4-inch meters.
• Torque bolts using a star pattern to 25 ft-lbs (33.8 N·m). Supplied
flanges are two-piece Van Stone style and allow the meter to be
oriented regardless of the mating flanges position.
For best results, always verify accuracy before use.
Blowing compressed air through the turbine assembly
could damage the rotor.
Do not allow liquids to dry inside the turbine.
Handle the rotor carefully. Small scratches or nicks can
affect accuracy.
www.
.com