ACR STOVES FB5BK Technical Manual - Page 2

Browse online or download pdf Technical Manual for Wood stove ACR STOVES FB5BK. ACR STOVES FB5BK 10 pages.

Print Page

Important!

To ensure that you gain the most from your purchase, please

take a few minutes to read through this manual before lighting

the appliance for the first time.

Before installation, please ensure that the correct model has been supplied.

Please make a note of the serial number of your appliance in the space

provided on the front cover of this manual as this will be requested if you

require technical assistance in the future.

Please also ensure that the commissioning checklist at the rear of the manual

is completed in full.

Since April 2002 only registered competent installers can install solid fuel

appliances. Installations carried out by non-registered installers must be

inspected by local authority building control.

For more information please contact hetas at: www.hetas.co.uk or

telephone: 0845 6345626

• The installation of this appliance must

comply with current Building

Regulations and local regulations,

including those referring to national

and European standards.

• Do not operate this appliance if it

becomes damaged.

• Improper use, maintenance or fitting

parts other than those approved by

the manufacturer could lead to the

appliance becoming damaged or

unsafe which in turn could lead to

personal injury or damage to the

property and will void the warranty.

• The appliance must not be modified in

anyway unless authorised by ACR

Heat Products Ltd.

• The appliance should be inspected

regularly to ensure the airways are

clean and free from obstruction and

the chimney swept at least once a

year.

• The external surfaces of this

appliance will be very hot to the touch

when in operation and due care will

need to be taken when operating the

appliance to ensure safety. A fire

guard should be fitted if it is likely that

the elderly, infirm or children may

come into contact with the appliance.

• This appliance must not be used as

an incinerator.

• This appliance has been designed for

intermittent operation.

Tenbury Specifications

Nominal heat output

Chimney draft required

Height

Width

Depth

Weight

Air Requirement

Flue Mass Gas Flow

CO @ 13% O

Mean Flue Gas Temperature

Efficiency

Log Length

Hearth Temperature

800

725

DO NOT INSTALL IN A ROOM CONTAINING AN EXTRACTOR FAN UNLESS

THE APPLIANCE HAS BEEN CORRECTLY TESTED IN ACCORDANCE

WITH BUILDING REGS DOC J

9 kW - Wood

12Pa

Up to 1590 mm

800 mm

475 mm

115 kg

220mm²***

8.7g/s - Wood

0.06 Wood Vol%

263°C - Wood

79.3% - Wood

Up To 450 mm

157ºC

500

*** Please note that Building

Regulations Document J

advises that additional

permanent air supply is

required for appliances with

an output of above 5Kw.

With modern properties

additional air may be

required as Document J

suggests that adequate air

would be a benefit.

• If design air permeability

≥5.0m³/ (h.m²) then

550mm²/kW of appliance

rated output above 5kW

• If design air permeability

≤5.0m³/ (h.m²) then

550mm²/kW of appliance

rated output

• If in doubt, please consult

your registered installer

for advice.

475