AMD MCP61P User Manual - Page 16

Browse online or download pdf User Manual for Motherboard AMD MCP61P. AMD MCP61P 16 pages. Chipset m/b for amd socket am2/am2+ series processor
Also for AMD MCP61P: User Manual (19 pages)

Print Page

USEFUL HELP

4-1 HOW TO UPDATE BIOS

STEP 1. Prepare a bootable floppy disk. (You may make one by click START click RUN

type SYS A:

STEP 2. Download upgrade tools and the latest BIOS files of the motherboard from official

website and then make a copy of it to your bootable floppy disk after

decompressing these files

STEP 3. Insert the disk into A: ,start your computer and then type in

"A:\xxxxxx.BAT"(xxxxxxx being the file name of the latest BIOS )

STEP 4. Type Enter to update and flash the BIOS. The system will restart automatically

when BIOS is upgraded.

4-2 Trouble Shooting

Problem

No power to the system to the all power

light don't illuminate, fan inside power

supply doesn't turn on.

System inoperative. Keyboard lights are

on , power indicator lights are lit, and hard

drive is spinning.

System doesn't boot from hard disk drive,

can be booted from optical drive.

System only boots from optical

drive .Hard disk can be read and

applications can be used but booting from

hard disk is impossible.

Screen message says "Invalid

Configuration" or "CMOS Failure"

Can not boot system after installing second

hard drive.

Chapter 4

click OK)

Solution

1. Make sure power cable is security

plugged in. 2. Replace cable. 3. Contact

technical support.

Using ever pressure on both ends of the

DIMM , press down firmly until the

module snaps into places.

1. Check cable running from disk to disk

controller board. .Make sure both ends are

securely plugged in, check the drive type

in the standard CMOS setup. 2. Backing

up the hard drive is extremely

important .All hard disks are capable of

breaking down at any time.

1. Back up date and applications files. 2.

Reformat the hard drive. Reinstall

applications and date using backup disks.

Review system's equipment .Make sure

correct information on is in setup.

1. Set master /slave jumpers correctly. 2.

Run SETUP program and select correct

drive types. Call the drive manufacture for

compatibility with other drives.