AMD DIrect SSRFR-15WD User Manual - Page 6

Browse online or download pdf User Manual for Kitchen Appliances AMD DIrect SSRFR-15WD. AMD DIrect SSRFR-15WD 9 pages. 15” & 24” wine cooler

Print Page

OPERATING INSTRUCTIONS

It is recommended that you install the appliance in a place where the ambient temperature is between 16°C(~61

° F) - 32°C(~9Q° F). If the ambient temperature is above or below recommended temperature, the performance

of the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause

interior temperatures to fluctuate. The operation temperature range may not be reached.

CONTROL PANEL

SSRFR-15W/SSRFR-24W

1. Power: Press and hold to enable or disable power

to the unit, even while the unit is still plugged in.

2. Control Lock: Press and hold the power and

light buttons simultaneously to lock or unlock

the control panel. When the panel is locked, no

buttons will work other than the unlock function.

3. Lights: Press to turn the interior light on or off.

4. Display: Shows the currently set target

temperature.

5. Temperature Increase: Press once to increase

temperature by 1 ° F.

6. Temperature Decrease: Press once to decrease

temperature by 1° F.

7. Celsius/Fahrenheit Switch: Press and hold

both temperature buttons to switch the display

temperature between Celsius and Fahrenheit.

15" & 24" WINE COOLER USER MANUAL

SSRFR-15W/SSRFR-24W

1. Switching the cooler on/off: Press and hold the

power button for 6 seconds to switch the wine

cooler ON/OFF.

2. Temperature settings: The preset temperature

is 8 °C(46.4 °F) in the upper zone and 12 °C(S3.6

°F) in the lower zone. Press the + or - buttons for

the appropriate zone until required temperature

shows in the display. The display shows set

temperature when the cooler is on. To change the

temperature display from Celsius to Fahrenheit

or Fahrenheit to Celsius, press and hold keys

4+5 for 2 seconds. The display will show the set

value, °C/°F.

3. Light: Press the light button to switch the light ON

or OFF. To turn the light ON when the door opens,

press the light button for 6 seconds, the display

will show "OP", which means door control function

is ON. To turn the light function OFF, press the

light button for 6 seconds, the display will show

"CL", which means the door control function is

OFF.

4. Lock/unlock display: Press power button and +

button at the same time for one second to lock/

unlock all buttons on the panel.

5. Door alarm: The wine cooler is equipped with an

alarm that will sound if the door is left open for

more than 60 seconds. Close door or press any

key to mute the alarm.

6. Defrosting: The wine cooler will defrost

automatically every 4 hours for 20 minutes. During

defrost, the compressor stops, but the fan will

keep running.

7. Lowest Temperature Setting: The lower zone can

be set as low as 54°, and the upper section can be

set as low as 39°

CLEANING & MAINTENANCE

CLEANING YOUR FRIDGE

• Turn off the power, unplug the fridge, and remove

all items, including shelves.

• Wash the inside surfaces with a solution of warm

water and baking soda

• (about 2 tablespoons of baking soda per 4 cups

of water).

• Wash the shelves with a mild detergent solution.

• Wring excess water out of the sponge or cloth

before cleaning the area where the controls are

located, or any place on or near electrical parts.

• Wash the outside of the fridge with warm water and

a mild liquid detergent. Rinse well and wipe dry

with a clean, soft cloth.

• Use an approved stainless steel cleaner to clean

the door frame and handle. Do not use steel wool

or a steel brush on the stainless steel.

CAUTION

Failure to unplug the fridge during cleaning

could result in electrical shock or other personal

injury.

POWER FAILURE

Most power failures are corrected within a few hours

and they should not affect the temperature of your

fridge, as long as you avoid opening the door. If the

power is going to be off for a longer period of time,

it is recommended that you transfer all perishable/

sensitive contents to a functional fridge or cooler. To

prevent odor and mold growth, leave the door open

slightly, blocking it open if necessary. Lay a towel

down below the open front of the fridge in case any

frost buildup melts and drains out.

VACATION TIME

Short vacations: Leave the fridge running during

vacations that are shorter than three weeks.

Long vacations: If the fridge will not be used for a

month or more, remove all items and turn it off. Clean

and dry the interior thoroughly. To prevent odor and

mold growth, leave the door open slightly, blocking it

open if necessary. Lay a towel down below the open

front of the fridge in case any frost buildup melts and

drains out.

MOVING YOUR APPLIANCE

1. Remove all contents.

2. Securely tape down all loose items (shelves) inside

your appliance.

3. Turn the adjustable legs up to the base to avoid

damaging them.

4. Tape the door shut.

5. Be sure the fridge stays secure in an upright

position during transportation. Also, protect the

outside of the appliance with a blanket or similar

item.

ENERGY SAVING TIPS

• The appliance should be placed in the coolest

location possible, away from heat-producing

appliances and out of direct sunlight.

• Ensure that the unit is adequately ventilated. Never

cover air vents.

• Do not keep the door open any longer than

necessary.

• Let hot foods cool to room temperature before

storing them in the fridge.

• Do not overload the fridge, as it forces the

compressor to run more frequently, increasing the

power consumption.

• Be sure to wrap foods properly, and wipe

containers dry before placing them in the fridge, in

order to prevent frost buildup.

• Do not line shelves with aluminum foil, wax paper

or paper towels, as they will prevent proper air

circulation.