Co2meter TecPen MAP User Manual - Page 9

Browse online or download pdf User Manual for Analytical Instruments Co2meter TecPen MAP. Co2meter TecPen MAP 14 pages.

Print Page

Saving Data

After each measurement is completed and the pump stops running, the currently displayed measured

value can be stored in the internal memory of the TecPen by briefly pressing the SAVE button. By

default, a new data file is created each day using the date as the file name and the measured oxygen

level and a time stamp as data.

The TecPen outputs a comma-delimited text file (.txt) with a header row that can be imported

into any spreadsheet program. The data file format is as follows:

Data Label

Date

Time

Product_Number

Product_Name

Product_EAN

Product_Oxygen_Value

Amplitude

Tau

Temperature[°C]

Battery_Level[%]

Device Status

1. Press the ON/OFF button to turn on the unit.

2. Connect the TecPen to a PC using the supplied USB cable.

3. The TecPen appears on your PC like a USB drive with one or more saved data files.

4. Copy the files from the TecPen using your PC's file manager.

5. Disconnect the TecPen properly before removing the USB device from your PC

Before unplugging the USB cable, the TecPen MUST be ejected properly like any other standard

USB device to avoid damaging the TecPen's internal file system.

If the TecPen is unplugged from the USB port without first selecting the "Safely Remove Hardware

and Eject Media" option, all data still on the device may be lost.

Example

2019-03-15 (YYYY-MM-DD format)

14:33:30 (hours:minutes:seconds 24 hr.

clock)

123456 (user defined)

NAME56789ABCD (user defined)

0123456789ABC (user defined)

0.53472 (range 0-5%)

14016 (signal strength for error checking)

64.610248 (signal life for error checking)

25.187500 (Centigrade only)

86 (range 0-100%)

0=Normal (see device status codes)