Ameda HygieniKit Instructions Manual - Page 5
Browse online or download pdf Instructions Manual for Breast Pump Ameda HygieniKit. Ameda HygieniKit 14 pages. One-hand manual breast pump, milk collection system with one-hand breast pump adapter and flexishield areola stimulators
Also for Ameda HygieniKit: Operating & Cleaning Instructions (2 pages)
Print Page
Using the Ameda HygieniKit Milk Collection System
ALWAYS WASH HANDS WELL WITH SOAP AND WATER BEFORE PUMPING.
Attaching to Any Ameda Electric Breast Pump
The HygieniKit may be used to single or dual pump with any Ameda electric breast pump.
Simply insert the tubing adapter into the tubing adapter port.
Single and Dual Pumping
Putting Ameda HygieniKit to the Breast
To begin pumping:
• Center the nipple in the breast flange.
• Fill the breast flange with the breast to create an air seal.
• Angle breast flange down a bit so milk flows into bottle.
Checking Flange Fit
Some Ameda HygieniKits include one size breast flange, with an opening of 25mm. Other
Ameda kits include three flanges sizes (25, 28.5, and 30.5mm). Many mothers do well with
the 25mm standard size breast flange, but you may need a larger flange (30.5mm) or insert
(28.5mm) if pumping is uncomfortable or unproductive, even on low suction. If the standard
flange is too tight, a larger flange or insert may feel better and pump more milk. Flange
fit can change as the breast changes after birth and with pumping. Use the size that feels
best and gives the best results. If the 30.5mm size is not large enough, contact your Ameda
retailer for the Ameda Custom Breast Flanges 32.5/36mm.
4
E N G L I S H
To single pump:
Remove one tube and
close tubing adapter.
To dual pump:
Both tubes should be
attached to tubing adapter.
Dual pumping
with one hand
gives you a
free hand for
other things.