Coachcare B02T User Manual - Page 11

Browse online or download pdf User Manual for Blood Pressure Monitor Coachcare B02T. Coachcare B02T 15 pages.

Print Page

The battery compartment is located on the back side of the unit.

a) Remove cover from the bottom plate, as illustrated below picture-08

b) Insert the batteries (4 x size AAA ). Always use AAA long life batteries or

alkaline 1.5v batteries.

c) The memory retains all values although date and time must be reset - the

year number therefore ﬂashes automatically after the batteries are replaced.

d) To set date and time, follow the procedure described in Section 4.2.

Picture-08

Which batteries and which procedure?

Use four new, longlife 1.5V AAA batteries. Do not use batteries beyond their

expiration date. If the monitor is not going to be used for a prolonged period,

the batteries should be removed.

Using rechargeable batteries

You can also operate this instrument using rechargeable batteries.

•Only use "NiMH" reusable batteries!

• If the battery symbol

the batteries must be removed and recharged!

They must not remain inside the instrument, as they may become damaged

through total discharge even when switched oﬀ. The batteries must NOT be

discharged in the blood pressure monitor! If you do not intend to use the

instrument for a week or more, always remove the rechargeable batteries!

• Recharge these batteries using an external charger and follow manufactur-

er's instructions carefully.

5.10. Using the AC Adapter

You may also operate this monitor using an AC adapter (output 5V DC/1A

with Micro USB plug).

Use only an approved AC adapter to avoid damaging the unit.

a) Ensure that the AC adapter and cable are not damaged.

b) Plug the adapter cable into the AC adapter port on the right side of the

blood pressure monitor.

c) Plug the adapter into your electrical outlet. When the AC adapter is

connected, no battery current is consumed.

Note: No power is taken from the batteries while the AC adapter is connected

to the monitor. If electrical power is interrupted,(e.g., by accidental removal of

the AC adapter from the outlet) the monitor must be reset by removing the

plug from the socket and reinserting the AC adapter connection.

6. Care and Maintenance

Wash hands after each time measurement.

If one device is used by diﬀerent patients, wash hands before and after each

use.

a) Do not expose the device to either extreme temperatures, humidity, dust or

direct sunlight.

b) The cuﬀ contains a sensitive air-tight bubble. Handle this cuﬀ carefully and

avoid all types of stress through twisting or buckling.

c) Clean the device with a soft, dry cloth. Do not use gas, thinners or similar

solvents. Spots on the cuﬀ can be removed carefully with a damp cloth and

soapsuds. The cuﬀ with bladder must not be washed in a dishwasher, clothes

washer, or submerged in water.

d) Handle the tube carefully. Do not pull on it. Do not allow the tubing to kink

and keep it away from sharp edges.

e) Do not drop the monitor or treat it roughly in any way. Avoid strong

vibrations.

f) Never open the monitor! This invalidates the manufacturer's warranty.

g) Batteries and electronic instruments must be disposed of in accordance

with the locally applicable regulations, not with domestic waste.

6.1. Accuracy test

Sensitive measuring devices must be checked for accuracy from time to time.

We recommend a periodical inspection of your unit by an authorized dealer

every 1 year. Please turn to local distributor or the manufacturer.